Skip to main content

2005-2009 Publications

  • G.S. Frankel, “Assessing Corrosion Education,” Mat. Perf.48 (2009) 28-34.
  • Aldo Handojo, Yumei Zhai, Gerald Frankel and Melvin A. Pascall, “Measurement of adhesion strengths between various milk products on glass surfaces using contact angle measurement and atomic force microscopy,” J. Food Eng., 92 (2009) 305-311.
  • G.S. Frankel and M. Stratmann, “Future Perspectives of Corrosion Science,” Corros. Eng. Sci. Tech., 44, (2009) 328-331.
  • K.D. Ralston, T.L. Young, R.G. Buchheit, “Electrochemical Evaluation of Constituent Intermetallics in Aluminum Alloys 2024-T3 Exposed to Aqueous Vanadate Inhibitors,” J. Electrochem. Soc., 156, C135-C146 (2009).
  • M.K. Cavanaugh, R.G. Buchheit, N. Birbilis, Evaluation of a simple microstructural-electrochemical model for corrosion damage accumulation in microstructurally complex aluminum alloys, Engineering Fracture Mechanics, 76, 5, 641-650 (2009).
  • A.K. Mishra and G.S. Frankel, “Crevice Corrosion Repassivation of Alloy 22 in Aggressive Environments,” Corrosion, 64, (2008) 836-844.
  • G. S. Frankel and N. Sridhar, “Understanding Localized Corrosion,” Materials Today11 (2008) 38-44.
  • M. Kappes, L. Kovarik, M.J. Mills, G.S. Frankel, and M.K. Miller, “The Usefulness of Ultra-High Resolution Microstructural Studies for Understanding Localized Corrosion Behavior of Al Alloys,” J. Electrochem. Soc.155, (2008) C437-C443.
  • G. S. Frankel, “Electrochemical Techniques in Corrosion; Status, Limitations and Needs,” J. ASTM Int.5, Issue 2 (2008) online ISSN: 1546-962X, DOI: 10.1520/JAI101241, http://www.astm.org/JOURNALS/JAI/TOC/JAI522008.htm.
  • N. Birbilis, R.G. Buchheit, “Measurement and Discussion of Low-Temperature Hot Corrosion Damage Accumulation upon Nickel- Based Superalloy Rene 104,” Metallurgical and Materials Transactions A, 39A, 3224-3232 (2008).
  • C.S. Paglia, R.G. Buchheit, “Time-temperature-corrosion susceptibility in a 7050-T7451 friction stir weld,” Materials Sci. and Eng. A, 492, 250-254 (2008).
  • K.D. Ralston, S. Chrisanti, T.L. Young, R.G. Buchheit, “Corrosion inhibition of aluminum alloy 2024-T3 by aqueous vanadium species,” J. Electrochem. Soc., 155, 7, C350-359 (2008).
  • S.P.V. Mahajanam, R.G. Buchheit, “Characterization of inhibitor release from Zn-Al-[V10O28]6- hydrotalcite pigments and corrosion protection from hydrotalcite-pigmented epoxy coatings,” Corrosion, 64, 3, 230-240 (2008).
  • G. Kumar, R.G. Buchheit, “Use of artificial neural network models to predict coated component life from short-term electrochemical impedance spectroscopy measurements,” Corrosion, 64, 3, 241-254 (2008).
  • C.S. Paglia, R.G. Buchheit, “A look in the corrosion of aluminum alloy friction stir welds,” Scripta Metall., 58, 5, 383-387 (2008).
  • N. Birbilis, R.G. Buchheit, “Investigation and discussion of characteristics for intermetallic phases common to aluminum alloys as a function of solution pH,” J. Electrochem. Soc., 155, 3, C117-C126 (2008).
  • N. Birbilis, M.K. Cavanaugh, L. Kovarik, R.G. Buchheit, “Nano-scale dissolution phenomena in Al-Cu-Mg alloys,” Electrochemistry Comm., 10, 1, 32-37 (2008).
  • Tsai-Shang Huang, Shang Zhao, G. S. Frankel and D. A. Wolfe, “A Statistical Model for Localized Corrosion in 7xxx Aluminum Alloys,” Corrosion, 65, (2007) 819-827.
  • E. Tada and G. S. Frankel, “Effect of Particulate Silica Coatings on Localized Corrosion Behavior of AISI 304SS under Atmospheric Corrosion Conditions,” J. Electrochem. Soc., 154, (2007) C318-C325.
  • E. Tada and G. S. Frankel, “Electrochemical Behavior of AISI 304SS with Silica Coating in 0.1 M NaCl,” J. Electrochem. Soc., 154, (2007) C312-C317.
  • Tsai-Shang Huang and G. S. Frankel, “Effects of Temper and Potential on Localized Corrosion Kinetics of AA7075,” Corrosion, 65, (2007) 731-743.
  • Zhijun Zhao and G. S. Frankel, “Surface Layer Dissolution Kinetics of AA7075 in Various Tempers,” Corrosion63, (2007) 613-624.
  • M. Iannuzzi and G. S. Frankel, “Inhibition of AA2024-T3 Corrosion by Vanadates: An AFM Scratching Investigation” Corrosion, 63, (2007) 672-688.
  • Zhijun Zhao and G. S. Frankel, “The Effect of Temper on the First Breakdown in AA7075,” Corros. Sci.49, (2007) 3089-3111.
  • Zhijun Zhao and G. S. Frankel, “On the First Breakdown in AA7075-T6,” Corros. Sci.49. (2007) 3064-3088.
  • M. Iannuzzi and G. S. Frankel, “Mechanisms of Corrosion Inhibition of AA2024-T3 by Vanadates” Corros. Sci.49, (2007) 2371-2391.
  • Shang Zhao, Douglas A. Wolfe, Tsai-Shang Huang, and Gerald S. Frankel, “Generalized Model for IGC Growth in Aluminum Alloys,” J. Statistical Planning and Inference, 137, (2007) 2405-2412.
  • G. S. Frankel, M. Stratmann, M. Rohwerder, A. Michalik, B. Maier, J. Dora, and M. Wicinski, “Potential control under thin aqueous layers using a Kelvin Probe,” Corros. Sci.49, (2007) 2021-2036.
  • M. Iannuzzi, J. Kovac, and G. S. Frankel, “A Study of the Mechanisms of Corrosion Inhibition of AA2024-T3 by Vanadates Using the Split Cell Technique,” Electrochim Acta, 52, (2007) 4032-4042.
  • Yeong Ho Kim and G. S. Frankel, “Effect of Noble Element Alloying on Passivity and Passivity Breakdown of Ni,” J. Electrochem. Soc.154 (2007) C36-C42.
  • Xinyan Zhao and G. S. Frankel, “Quantitative Study of Exfoliation Corrosion: Exfoliation of Slices in Humidity Technique,” Corros. Sci.49 (2007) 920-938.
  • Tsai-Shang Huang and G. S. Frankel, “Sharp Intergranular Corrosion Fissures in AA7178,” Corros. Sci., 49 (2007) 858-876.
  • Xiaodong Liu, G. S. Frankel, B. Zoofan and S.I. Rokhlin, “In Situ Observation of Intergranular Stress Corrosion Cracking in AA2024-T3 under Constant Load Conditions,” Corros. Sci49 (2007) 139-148.
  • R.G. Buchheit and S.P.V. Mahajanam, “Ion exchange compounds for corrosion inhibiting pigments in organic coatings”, ACS Symposium Series, Vol. 962, p. 108, 2007.
  • C.S. Paglia, K.V. Jata, R.G. Buchheit, “The influence of artificial aging on the microstructure, mechanical properties, corrosion, and environmental cracking susceptibility of a 7075 friction-stir-weld,” Materials and Corrosion-Werkstoffe und Korrosion, 58, 10, 737-750 (2007).
  • M.K. Cavanaugh, N. Birbilis, R.G. Buchheit, ”Investigating localized corrosion susceptibility arising from Sc containing intermetallic Al3Sc in high strength Al-alloys,”Scripta. Metall., 56, 11, 995-998 (2007).
  • S.R. Taylor, G. J. Shiflet, J. R. Scully, R.G. Buchheit W. VanOoij, K. Sieradzki, R.E. Diaz, C.J. Brinker, A.L. Moran, “Increasing the functionality of military coatings using nano-dimensioned materials,” Corrosion Reviews, 25, 5-6, 491-522 (2007).
  • Y. Kim, R.G. Buchheit, “A characterization of the inhibiting effect of Cu on metastable pitting in dilute Al-Cu solid solution alloys,” Electrochmi. Acta, 52, 7, 2437-2446 (2007).
  • Y. Kim, R.G. Buchheit, P. G. Kotula, “Effect of Alloyed Cu on Localized Corrosion Susceptibility of Al-Cu solid solution alloys—Surface characterization by XPS and STEM,” submitted to Corrosion Science April, 2007.
  • M.K. Cavanaugh, N. Birbilis, R.G. Buchheit , F. Bovard, “Investigating localized corrosionsusceptibility arising from Sc containing intermetallic Al3Sc in high strength Al-alloys,” Scripta Mater., xxx, xxx-xxx (2007).
  • C.S. Pagila, R.G. Buchheit, "The influence of a gas propane torch flame on the EAC of a 2219 FSW" Welding and Cutting Journal (Germany). 106,2,96-102 (2007).
  • Y. Kim, R.G. Buchheit, “A characterization of the inhibiting effect of Cu on metastable pitting in dilute Al-Cu solid solution alloys,” Electrochim. Acta 52, 7, 2423-2446 (2007).
  • Xinyan Zhao and G. S. Frankel, “Effects of RH, Temper and Stress on Exfoliation Corrosion Kinetics of AA7178,” Corrosion62 (2006) 256-266.
  • M. Iannuzzi, T. Young and G. S. Frankel, “Aluminum Alloy Corrosion Inhibition by Vanadates,” J. Electrochem. Soc.153 (2006) B533-B541.
  • Xiaodong Liu and G. S. Frankel, “Effects of Compressive Stress on Localized Corrosion in AA2024-T3,” Corros. Sci., 48 (2006) 3309-3329.
  • Tsai-Shang Huang and G. S. Frankel, “The Influence of the Grain Structure on Anisotropic Localized Corrosion Kinetics of AA7xxx-T6 Alloys,” Corros. Eng. Sci. Tech., 41 (2006) 192-199.
  • B. Zoofan, J.-Y. Kim, S. I. Rokhlin, and G. S. Frankel, "Phase-contrast X-ray imaging for nondestructive evaluation of materials," J. Appl. Phys.,100 (2006) 014502-1 – 014502-7.
  • Yeong Ho Kim, G. S. Frankel, and J. C. Lippold, “Development of a Chromium-free Consumable for Austenitic Stainless Steels: Effect of Dilution and the Behavior of Bead-on-Plate Welds,” ISIJ International46, (2006) 698-704.
  • Xiaodong Liu, G. S. Frankel, B. Zoofan and S. I. Rokhlin, “In Situ X- ray Radiographic Study of Stress Corrosion Cracking in AA2024-T3,” Corrosion62, 217-230 (2006).
  • Yeong Ho Kim, G. S. Frankel and J. C. Lippold “Cr-free Consumables for Welding Stainless Steel. Part 2: Optimization of Alloy Composition Based on Corrosion Behavior,” Corrosion62, 109-120 (2006).
  • Xiaodong Liu, G. S. Frankel, B. Zoofan and S.I. Rokhlin, “The Transition from Intergranular Corrosion to Intergranular Stress Corrosion Cracking in AA2024-T3, J. Electrochem. Soc.153, B42-B51 (2006).
  • Yeong Ho Kim, G. S. Frankel, J. C. Lippold and G. Guaytima, “Cr-free Consumables for Welding Stainless Steel. Part 1: Monel,” Corrosion62, 44-53 (2006).
  • N. Birbilis, M.K. Cavanaugh & R.G. Buchheit, “Electrochemical behavior and localized corrosion associated with Al7Cu2Fe particles in aluminum alloy 7075-T651”, Corrosion Science, Vol. 48 (12). pp. 4202-15, 2006.
  • N. Birbilis, M.K. Cavanaugh and R.G. Buchheit, “Electrochemical response of AA7075-T651 following immersion in NaCl solution”, ECS Transactions, Vol. 1 (4) pp. 115-25, 2006.
  • C.S. Paglia, R.G. Buchheit, “Microstructure, microchemistry, and Environmental Cracking Susceptibility of Friction Stir Welded 2219-T87,” Materials Science and Engineering A 429 (1-2): 107-114 (2006).
  • C. S. Paglia, K.V. Jata, R.G. Buchheit, “A Cast 7050 Friction Stir Weld with Scandium: Microstructure, Corrosion and Environmental Assisted Cracking,” Materials Science and Engineering  A 424, 196-204 (2006).
  • Y. Yoon Y, R.G. Buchheit, “Dissolution behavior of Al2CuMg (S phase) in chloride and chromate conversion coating solutions,” J. Electrochem. Soc., 153 (5): B151-B155 (2006).
  • Jiho Kang and G. S. Frankel, “Potentiostatic Pulse Testing for Assessment of Early Coating Failure,” Z. Phys. Chemie219, 1519-1538 (2005).
  • B. Zoofan, J.-Y Kim, S. I. Rokhlin and G. S. Frankel, “Application of Phase-Contrast Microradiography in NDT,” Mat. Eval.63, 1122-1127 (2005).
  • H. S. Isaacs, K. Sasaki, C. S. Jeffcoate, V. Laget, and R. Buchheit,”Formation of Chromate Conversion Coatings on Aluminum and Its Alloys: An In Situ XANES Study.” J. Electrochem. Soc., 152 (11) B441-447 (2005).
  • E.B. Shell, R.G. Buchheit, B. Zoofan, “Correlation of Residual Fatigue Life with Quantified NDE Measurements,” Int. J. Fatigue,  27 (2): 105-112 (2005).
  • N. Birbilis, R. G. Buchheit, D. L. Ho, M. Forsyth,” Inhibition of AA2024-T3 on a Phase-by-Phase Basis Using an Environmentally Benign Inhibitor, Cerium Dibutyl-Phosphate,” Electrochem. And Sol. St. Lett., 8, C180-183 (2005).
  • Y. Yoon, R.G. Buchheit, “The Effect of Cu Content on Chromate Conversion coating Formation of Compositional Analogs of the  Phase Mg(Zn, xCu)2”, Electrochem. & Sol. St. Lett. 8, B65-68 (2005).
  • N. Birbilis, B. N. Padgett, R.G. Buchheit, “Limitations in Microelectrochemical Cell Testing and Transformation of Electrochemical Transients for Acquisition of Microcell Impedance Data,” Electrochim. Acta,  50/16-17 3536-3544 (2005).
  • N. Birbilis, R.G. Buchheit, “Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys An Experimental Survey and Discussion,” J. Electrochem. Soc., 152, B140-B151 (2005).