2010-2014 publications

S.M. Cambier, D. Verreault, and G.S. Frankel, “Raman Investigation of Anodic Undermining of Coated Steel During Environmental Exposure,” Corrosion, 70, (2014) 1230-1237.[link]
S.M. Cambier, and G.S. Frankel, “Filiform Corrosion of PVB- and Eponol-Coated Steel After Standard Laboratory Exposures,” Corrosion, 70, (2014) 1219-1229.
Shan-Shan Wang, Jian-Tang Jiang, Guo-Hua Fan, Li Yang, Sheng-Long Dai, G.S. Frankel, and Liang Zhen, “Microstructure evolution in abrasion-induced surface layer on an Al-Zn-Mg-Cu alloy,” Mat. Char., 98 (2014) 18-25. [link]
O. Lopez-Garrity and G.S. Frankel, “Corrosion Inhibition of AA2024-T3 by Praseodymium Chloride,” Corrosion, 70, (2014) 928-941.[link]
Shan-Shan Wang, Jian-Tang Jiang, Sheng-Long Dai, D.N. Seidman, G.S. Frankel, and Liang Zhen, “Effect of surface roughness on breakdown behavior of Al-Zn-Mg-Cu alloy,” J. Electrochem. Soc., 161, (2014) C433-C440.
S.M. Cambier and G.S. Frankel, “Coating and Interface Degradation of Coated Steel, Part 2: Accelerated Laboratory Tests,” Electrochim. Acta, 136, (2014) 442-449.
O. Lopez-Garrity and G.S. Frankel, “Synergistic Corrosion Inhibition of AA2024-T3 by Sodium Silicate and Sodium Molybdate,” ECS Electrochem. Lett., 3 (2014) C33-C35. [link]
N. W. Khun, G.S. Frankel, M. Sumption, “Effects of normal load, sliding speed and surface roughness on tribological properties of niobium under dry and wet conditions,” Tribology Trans., 57, (2014) 944-954.
G.S. Frankel, “Electrochemical Techniques in Corrosion: Status, Limitations, and Needs,” ASTM J. Test. Eval., 42 (2014) 517.
B.C. Rincon Troconis and G.S. Frankel, “Effects of Pretreatments on the Adhesion of Acetoacetate to AA2024-T3 using the Blister Test,” Corrosion, 70, (2014) 483-495.
Anawati, G.S. Frankel, A. Agarwal and N. Sridhar, “Degradation and deactivation of Sn catalyst used for CO₂ reduction as function of overpotential,” Electrochim. Acta, 133, (2014) 188-196.
S.M. Cambier, R. Posner, and G.S. Frankel, “Coating and Interface Degradation of Coated Steel, Part 1: Field Exposure,” Electrochim. Acta, 133 (2014) 30-39.
S.C. Morton and G.S. Frankel, “Atmospheric Pitting Corrosion of AA7075-T6 Under Evaporating Droplets With and Without Inhibitors,” Mat. Corr., 64 (2014) 351-361.
N. Birbilis, A.D. King, S. Thomas, G.S. Frankel and J.R. Scully, “Evidence for enhanced catalytic activity of magnesium arising from anodic dissolution,” Electrochim. Acta, 132 (2014) 277-283.
O. Lopez-Garrity and G. S. Frankel, “Corrosion Inhibition of AA2024-T3 by Sodium Silicate,” Electrochim. Acta, 130 (2014) 9-21.
G.S. Frankel, X.-B. Chen, R.K. Gupta, S. Kandasamy, and N. Birbilis, “Effect of Vacuum System Base Pressure on Corrosion Resistance of Sputtered Al Thin Films,” J. Electrochem. Soc., 161 (2014) C195-C200.
L. Rossrucker, K.J.J. Mayrhofer, G.S. Frankel, and N. Birbilis, “Investigating the real time dissolution of Mg using online analysis by ICP-MS,” J. Electrochem. Soc., 161 (2014) C115-119.
O. Lopez-Garrity and G.S. Frankel, “Corrosion Inhibition of AA2024-T3 by Sodium Molybdate,” J. Electrochem. Soc., 161 (2014) C95-C106.[link]
Xiaoji Li, F. Gui, Hongbo Cong, C.S. Brossia, G.S. Frankel, “Evaluation of Nitrate and Nitrite Reduction Kinetics Related to Liquid-Air-Interface Corrosion,” Electrochim. Acta, 117, (2014) 299-309.
Zhicao Feng, G.S. Frankel, and C.A. Matzdorf, “Quantification of Accelerated Corrosion Testing of Coated AA7075-T6,” J. Electrochem. Soc., 161 (2014) C42-C49.
Xiaoji Li, Hongbo Cong, F. Gui, C.S. Brossia, and G.S. Frankel, “ Development of Liquid-Air-Interface Corrosion of Steel in Nitrate Solutions,” Corrosion, 70 (2014) 230-246.
Jiheon Jun, K. Holguin, and G.S. Frankel, “Pitting Corrosion of Very Clean 304 Stainless Steel,” Corrosion, 70 (2014) 146-155.
N.W. Khun, B.C. Rincon Troconis, G.S. Frankel, “Effects of carbon filler content on adhesion strength and wear and corrosion resistance of epoxy composite coatings on AA2024-T3,” Prog. Org. Coat., 77 (2014) 72-80.
Zhicao Feng and G.S. Frankel “Galvanic Test Panels for Accelerated Corrosion Testing of Coated Al Alloys, Part II: Measurement of Galvanic Interaction,” Corrosion, 70 (2014) 95-106.
J. F. Chen, G.S. Frankel, J. T. Jiang, C. Y. Xu, L. Zhen, “Effect of age-forming on corrosion properties of an Al-Zn-Mg-Cu alloy,” Mat. Corr., 65 (2014) 670-677.
L. Cao, G.S. Frankel, N. Sridhar, “Effect of Oxygen on Ethanol SCC Susceptibility, Part 2: Dissolution-Based Cracking Mechanism,” Corrosion, 69 (2013) 851-862.
L. Cao, G.S. Frankel, N. Sridhar, “Effect of Oxygen on Ethanol SCC Susceptibility, Part 1: Electrochemical Response and Cracking-Susceptible Potential Region,” Corrosion, 69 (2013) 768-780.
B.C. Rincon Troconis and G.S. Frankel, “Effect of Roughness and Surface Topography on Adhesion of PVB to AA2024-T3 using the Blister Test,” Surf. Coat. Tech., 236 (2013) 531–539.
Xiaoji Li, Hongbo Cong, F. Gui, C.S. Brossia, and G.S. Frankel, “Examination of Mechanisms for Liquid-Air-Interface Corrosion of Steel in High Level Radioactive Waste Simulants,” J. Electrochem. Soc., 160 (2013) C521-C530.
Huang Lin and G.S. Frankel, “Accelerated Atmospheric Corrosion Testing of Ag,” Corrosion, 69 (2013) 1060-1072.
C.A. Matzdorf, W.C. Nickerson, B.C. Rincon Troconis, G.S. Frankel, Longfei Li, and R.G. Buchheit, “Galvanic Test Panels for Accelerated Corrosion Testing of Coated Al Alloys, Part I: Concept,” Corrosion, 69 (2013) 1240-1246.
Huang Lin and G.S. Frankel, “Atmospheric corrosion of Cu by UV, Ozone and NaCl,” Corr. Eng. Sci. Tech., 48 (2013) 461-468.
Shan-Shan Wang, G.S. Frankel, Jian-Tang Jiang, Jun-Feng Chen, Shen-Long Dai, and Liang Zhen, “Mechanism of Localized Breakdown of 7000 Series Aluminum Alloys,” J. Electrochem. Soc. 160, (2013) C493-C502.
N.W. Khun, M. Sumption and G.S. Frankel, “Smoothening of Niobium by Electropolishing,” J. Appl. Electrochem., 43 (2013) 829–838.
L. Cao, G.S. Frankel, N. Sridhar, “Effect of Chloride on Stress Corrosion Cracking Susceptibility of Carbon Steel in Simulated Fuel Grade Ethanol,” Electrochim. Acta, 104 (2013) 255-266.
Huang Lin, G.S. Frankel, and W. H. Abbott, “Analysis of Ag Corrosion Products,” J. Electrochem. Soc., 160 (2013) C345-C355.
Huang Lin and G.S. Frankel, “Atmospheric Corrosion of Cu during Constant Deposition of NaCl,” J. Electrochem. Soc., 160 (2013) C336-344.
N. W. Khun, G.S. Frankel, and J. Zimmerman, “Investigation of surface morphology, wear resistance and adhesiveness of AA6061-T6 treated in a hexafluorozirconic acid based solution,” Corrosion, 69, (2013) 259-267.
D. Verreault, A.M. Jubb, G.S. Frankel, M. Stratmann, H.C. Allen, R. Posner, “Laser Effects on Volta Potential Transients Recorded by a Kelvin Probe,” ECS Electrochem. Lett., 5 (2013) H19-H21.
G.S. Frankel, A. Samaniego, and N. Birbilis, “Evolution of Hydrogen at Dissolving Magnesium Surfaces,” Corros. Sci., 70, (2013) 104-111.
N. W. Khun and G.S. Frankel, “Effects of surface roughness, texture and polymer degradation on cathodic delamination of epoxy coated steel samples,” Corros. Sci., 67, (2013) 152-160.
L. Cao, G.S. Frankel, N. Sridhar, “Supporting Electrolyte for Corrosion and Cracking Studies in Deaerated Simulated Fuel Grade Ethanol,” J. Electrochem. Soc., 160, (2013) C19-C27.
Cavanaugh, M.K., N. Birbillis, and R.G. Buchheit. Modeling Pit initiation rate as a function of environment for Aluminum alloy 7075-T651.Electrochimica Acta 59 (2012): 336-345.
Chiacchiarelli, L.M. , Y. Zhai, G.S. Frankel, A.S. Agarwal, N. Sridhar. Cathodic degradation mechanisms of pure Sn electocatalyst in a nitrogen atmosphere. J. Applied Electrochemistry 42.1 (2012): 21-29.
Cong, H., C.S. Brossia, J.A. Beavers, G.S. Frankel, Bruce Wiersma, Kayle Boomer, Leon Stock, and G.L. Edgemon. Evaluation of laboratory screening techniques for liquid air interface corrosion in Hanford waste simulants. NACE International Conference series 6 (2012): 4538-4552.
Guo, Y., and G.S. Frankel. Active corrosion inhibition of AA2024-T3 by trivalent chrome process treatment. Corrosion 68.4 (2012).
Guo, Y., and G.S. Frankel. Characterization of trivalent chromium process coating on AA2024-T3. Surface and Coating Technology 206.19-20 (2012): 3895-3902.
Kappes, M., G.S. Frankel, N. Sridhar, and R.M. Carranza. Corrosion behavior of carbon steel in acidified, thiosulfate-containing brines. Corrosion 68.10 (2012):872-884.
Kappes, M., G.S. Frankel, N. Sridhar, and R.M. Carranza. Reaction Paths of thiosulfate during corrosion of carbon steel in acidified brines. J. Electrochem. Soc. 159.4 (2012):C195-C204.
Kappes, M., G.S. Frankel, R. Thodla, M. Mueller, N. Sridhar, and R.M. Carranza. Hydrogen permeation and corrosion fatigue crack growth rates of X65 pipeline steel exposed to acid brines containing thiosulfate or hydrogen sulfide. Corrosion 68.11 (2012): 1015-1028.
Murer, N., N.A. Missert, and R.G. Buchheit. Finite element modeling of the galvanic corrosion of aluminum at engineered copper particles. J. Electrochem. Soc. 159.6 (2012): C265-C276.
N. Murer, R.G. Buchheit, “Stochastic Modeling of Pitting Corrosion in Aluminum Alloys,” Corrosion Science, (2012) http://dx.doi.org.proxy.lib.ohiostate.edu/10.1016/j.corsci.2012.11.034.
E. Alyamac, H. Gu, M.D. Soucek. S.Y. Qiu, R. G. Buchheit, “ Alkoxysilane oligomer modified epoxide primers,” Progress in Organic Coatings, 74, 1, 67-81 (2012). DOI: 10.1016/j.porgcoat.2011.11.012.
J. Ma, Y. Sahai, R.G. Buchheit, “Evaluation of multivalent phosphate cross-linked chitosan biopolymer membrane for directed borohydride fuel cells,” Journal of Power Sources, 202, 18-27 (2012). DOI: 10.1016/j.jpowsour.2011.11.003
M. K. Cavanaugh, N. Birbilis, R.G. Buchheit, “Modeling pit initiation rate as a function of environment for aluminum alloy 7075-T651”, Electrochemica Acta, 59, 336-345 (2012) DOI: 10.1016/j.electacta.2011.10.069 tFragm5�- H�� ss=palatino>J. Ma, Y. Sahai, R.G. Buchheit, “Evaluation of multivalent phosphate cross-linked chitosan biopolymer membrane for directed borohydride fuel cells,” Journal of Power Sources, 202, 18-27 (2012). DOI: 10.1016/j.jpowsour.2011.11.003
Nunez Moran, E., G.S. Frankel, Y.H. Kim. Localized corrosion resistance of 21Cr ferritic stainless steel.NACE International Corrosion Conference Series 4 (2012): 3317-3328.
Posner, R., A.M. Jubb, G.S. Frankel, M. Stratmann, and H.C. Allen. A simultaneous Kelvin Probe and Raman spectroscopy approach for in situ surface and interface analysis. Electrochimica Acta 76 (2012): 34-42.
Posner, R., A.M. Jubb, G.S. Frankel, M. Stratmann, and H.C. Allen. Simultaneous in situ Kelvin probe and Raman spectroscopy analysis of electrode potentials and molecular structures at polymer covered salt layers on steel. Electrochimica Acta 83 (2012): 327-334.
Seong, J., and G.S. Frankel. Assessment of Coating Adhesion Degradation by Atomic Force Microscopy Scratching. Corrosion 68.3 (2012): 032501-1-032501-4
J.W. Sowards, D. Liang, B.T. Alexandrov, G.S. Frankel, J.C. Lippold, “Solidification Behavior and Weldability of Dissimilar Welds Between a Cr-free Ni-Cu Welding Consumable and Type 304L Austenitic Stainless Steel” Metallurgical and Materials Transactions A, 43A (2012) 1209-1222.
Adhikari, Saikat, K.A. Unocic, Y. Zhai, G.S. Frankel, Johm Zimmerman, and W. Fristad. Hexafluorozirconic acid based surface pretreatments: Characterization and performance assessment. Electrochimica Acta 56.4 (2011): 1912-1924.
Atapour, M., A.L. Pilchak, G.S. Frankel, and J.C. Williams. Corrosion behavior of βtitanium alloys for biomedical applications. Materials Science and Engineering C 31.5 (2011): 885-891.
Cong, H., F. Gui, C.S. Brossia, J.A. Beavers, G.S. Frankel, G.L. Edgemon, Kayle Boomer, and Bruce Wiersma. An electrochemical study of liquid air interface corrosion in dilute Hanford nuclear waste. NACE International- Corrosion 2011 Conference and Expos (2011).
Hansen, D., and G.S. Frankel. ECS Transactions: Preface. ECS Transactions 33.14 (2011): iii, Corrosion and Biofuels.
Hurley, B.L., S. Qiu, and R.G. Buchheit. Raman spectroscopy characterization of aqueous vanadate species interaction with aluminum alloy 2024-T3 surfaces. J. Electrochem. Soc. 158.5 (2011): C125-C131.
Li, J.F., B. Maier, and G.S. Frankel. Corrosion of an Al-Mg-Si alloy under MgCl₂ solution droplets. Corrosion Science 53.6 (2011): 2145-2151.
Ma, J., N.A. Choudhury, Y. Sahai, and R.G. Buchheit. Performance study of direction borohydride fuel cells employing polyvinyl alcohol hydrogel membrane and nickel-based anode. Fuel Cells 11.5 (2011): 603-610.
Maier, B., and G.S. Frankel. Pitting corrosion of silica-coated type 304 stainless steel under thin electrolyte layers. Corrosion 67.3 (2011).
Nunez Moran, E., G.S. Frankel, Y.H. Kim. Localized corrosion resistance of 21% Cr ferritic stainless steels. Corrosion 67.9 (2011).
Seyeux, A., G.S. Frankel, N. Missert, K.A. Unocic, L.H. Klein, A. Galtayries, and P. Marcus. ToF-SIMS imaging study of the early stages of corrosion in Al-Cu thin films. J. Electrochem. Soc. 158.6 (2011): C165-C171.
Sowards, J.W., D. Liang, B.T. Alexandrov, G.S. Frankel, and J.C. Lippold. A new chromium-free welding consumable for joining austenitic stainless steels. Welding Journal 90.4 (2011): 63s-76s.
Südholz, A.D., N.T. Kirkland, R.G. Buchheit, and N. Birbillis. Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys. Electrochemical and Solid-State Letters 14.2 (2011): C5-C7.
M. Atapour, A. Pilchak, G.S. Frankel, J.C. Williams, M.H. Fathi, and M. Shamanian, “Corrosion Behavior of Ti-6Al-4V with Different Thermomechanical Treatments and Microstructures,” Corrosion, 66 (2010) 065004-1 to 065004-9.
M. Atapour, A. Pilchak, G.S. Frankel, and J.C. Williams “Corrosion Behavior of Friction Stir and Gas Tungsten Arc Welded Ti-6Al-4V,” Met. Mat. Trans. A, 41, (2010) 2318-2327.
Anawati, B. Graver, H. Nordmark, Z. Zhao, G.S Frankel, John Walmsley, and Kemal Nisancioglu, “Multilayer Corrosion of Aluminum Activated by Lead,” J. Electrochem. Soc. 157 (2010) C313-C320.
Bastian Maier and G.S. Frankel, “Pitting Corrosion of Bare Stainless Steel 304 under Chloride Solution Droplets,” J. Electrochem. Soc., 157, (2010) C302-C312.
M. Kappes, G.S. Frankel and N. Sridhar, “Study of Adhesion and Adhesion Degradation of a Pressure Sensitive Tape on Carbon Steel,” Prog. Org. Coat., 69 (2010) 57-62.
M. Atapour, A. Pilchak, G.S. Frankel, and J.C. Williams “Corrosion Behavior of Investment Cast and Friction Stir Processed Ti-6Al-4V,” Corros. Sci., 52 (2010) 3062–3069.
Gerald Sigua, Saikat Adhikari, G.S. Frankel and Melvin A. Pascall, “The Use of Atomic Force Microscopy to Measure the Efficacies of Various Chemical Sanitizers in Removing Organic Matter from Glass Surfaces” J. Food Eng., 100 (2010) 139-144.
Z. Y. Chen, D. Liang, G. Ma, G. S. Frankel, H. Allen, and R. G. Kelly, “Influence of UV Irradiation and Ozone on the Atmospheric Corrosion of Bare Silver,” Corr. Eng. Sci. Tech., 45, (2010) 169-180.
D. Liang, J.W. Sowards, G.S. Frankel, B.T. Alexandrov and J.C. Lippold, “Corrosion Resistance of Welds in 304L Stainless Steel Made with a Nickel-Copper-Ruthenium Welding Consumable,” Corros. Sci. 52 (2010) 2439-2451.
D. Liang, H. C. Allen, G. S. Frankel, Z. Y. Chen, and R. G. Kelly, “Effects of Sodium Chloride Particles, Ozone, UV, and Relative Humidity on Atmospheric Corrosion of Silver,” J. Electrochem. Soc., 157, (2010) C146-156.
D. Liang, J.W. Sowards, G.S. Frankel, B.T. Alexandrov and J.C. Lippold, “A Corrosion Study of Nickel-Copper and Nickel-Copper-Palladium Welding Filler Metals,” Mat. Corr., 61, (2010) 909-919.
S. Taira and G.S. Frankel, “Localized Corrosion of Ni Based Alloys Under Thin Electrolyte Layers,” Corrosion & Materials (Australia), 35 (1), (2010) 39-47.
G. Kumar, R.G. Buchheit, Determination of Structure and Chemistry of Corrosion Resistant Chitosan-(3- Glycidoxypropyl)-Trimethoxysilane-Vandate Coatings by Optical Spectroscopy and X-ray Photoelectron Spectroscopy, submitted to Progress in Organic Coatings (2010).
G. Kumar, R.G. Buchheit, Chitosan-based and Vanadate- and Silane-modified Corrosion Inhibiting Coatings for Aluminum, submitted to Journal of Coatings Technology-Research (2010).
Cavanaugh, M.K., Buchheit, R.G., "Part II: Neural network modeling of pit initiation rate as a function of environment for AA7075-T651", J. Electrochem. Soc., submitted for publication (2010).
Y. Kim, R. G. Buchheit and P.G. Kotula,^“Effect of Alloyed Cu on Localized Corrosion Susceptibility of Al-Cu Solid Solution Alloys—Surface Characterization by XPS and STEM,” Electrochimica Acta 55, 7367-7375 (2010).
R.G. Buchheit, N. Birbilis “Electrochemical Microscopy: An Approach for Understanding Localized Corrosion in Microstructurally Complex Metallic Alloys”, Electrochimica Acta, 55, 27, 7853-7859 (2010) doi.10.1016/j.electacta.2010.04.046
M.K. Cavanaugh, R.G. Buchheit, N. Birbilis^{, “}Modeling the environmental dependence of pit growth using neural network approaches,” Corrosion Science 52 (2010) 3070-3077 DOI: 10.1016/j.corsci.2010.05.027.
Y. Sahai, J. Ma, R.G. Buchheit, “Direct Borohydride Fuel Cell using Ni-based Composite Anodes,” Journal of Power Sources, 195,15, 4709-4713 (2010). Doi:10.1016/j.jpowsour.2010.02.034.